Sony DVS-9000 User Manual page 129

: Apply the trigger on a change in the polarity of the input signal.
(Level): When the input is low or high, the specified signal format
or screen aspect ratio applies. (See "Carrying out level settings" (page
120).)
No Operation: Apply no trigger on an input pulse.
3
In the <Target Device> group, select what the setting applies to (SCU1 to
SCU3).
4
Using any of the following methods, select the action you want to set.
• Press directly on the list appearing in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knobs to make the setting.
Knob Parameter
2 Action
5 Reg No
a) • Action list when the trigger type is other than "Level"
M/E-1 Cut, M/E-2 Cut, M/E-3 Cut, P/P Cut,
M/E-1 Auto Trans, M/E-2 Auto Trans, M/E-3 Auto Trans,
P/P Auto Trans
M/E-1 Key1 Auto Trans, M/E-1 Key1 Cut
M/E-1 Key2 Auto Trans, M/E-1 Key2 Cut
M/E-1 Key3 Auto Trans, M/E-1 Key3 Cut
M/E-1 Key4 Auto Trans, M/E-1 Key4 Cut
M/E-2 Key1 Auto Trans, M/E-2 Key1 Cut
M/E-2 Key2 Auto Trans, M/E-2 Key2 Cut
M/E-2 Key3 Auto Trans, M/E-2 Key3 Cut
M/E-2 Key4 Auto Trans, M/E-2 Key4 Cut
M/E-3 Key1 Auto Trans, M/E-3 Key1 Cut
M/E-3 Key2 Auto Trans, M/E-3 Key2 Cut
M/E-3 Key3 Auto Trans, M/E-3 Key3 Cut
M/E-3 Key4 Auto Trans, M/E-3 Key4 Cut
P/P DSK1 Auto Trans, P/P DSK1 Cut
P/P DSK2 Auto Trans, P/P DSK2 Cut
P/P DSK3 Auto Trans, P/P DSK3 Cut
P/P DSK4 Auto Trans, P/P DSK4 Cut
FTB Auto Trans, FTB Cut
SS ? Recall,
M/E-1 Key1 SS ? Recall, M/E-1 Key2 SS ? Recall
M/E-1 Key3 SS ? Recall, M/E-1 Key4 SS ? Recall
M/E-2 Key1 SS ? Recall, M/E-2 Key2 SS ? Recall
M/E-2 Key3 SS ? Recall, M/E-2 Key4 SS ? Recall
M/E-3 Key1 SS ? Recall, M/E-3 Key2 SS ? Recall
M/E-3 Key3 SS ? Recall, M/E-3 Key4 SS ? Recall
P/P DSK1 SS ? Recall, P/P DSK2 SS ? Recall
P/P DSK3 SS ? Recall, P/P DSK4 SS ? Recall
Effect ? Recall, Effect ? Recall & Run, KF Run, KF Stop,
KF Rewind, No Action
Adjustment
Action selection
Register number
Setting values
a)
1 to ...
b)
1 to 99
c)
1 to 399
129
Setup Relating to DCU