Reset And Initialization (Initialize Menu) - Sony DVS-9000 System User Manual

Reset and Initialization (Initialize Menu)

To carry out a reset or memory initialization for a device, use the System
>Initialize menu.
• Reset: Reset to state after powering on.
• All Clear: Clear the memory, and carry out initialization. The Network
Config, System Config, Format, and Start Up setup values are set by
reference to data stored in non-volatile memory, and the system
automatically starts up. It is not necessary to reset the Date/Time settings.
For more details, see "Saving and Recalling Setup Data" (page 843).
To display the Initialize menu
In the Engineering Setup menu, select VF1 'System' and HF5 'Initialize.'
The status area shows the current start-up mode settings.
Resetting the device and initializing memory
1
In the status area of the System >Initialize menu, select the device to which
the settings are to apply.
2
In the <Initialize> group, select one of the following modes.
Reset: Reset the device.
All Clear: Initialize memory.
3
Press [Execute].
A confirmation message appears.
4
Select [Yes].
Depending on the selection in step 2, the following is the result.
• When you selected [Reset], a reset is applied to the device causing it to
be restarted in the start-up state.
• When you selected [All Clear], all memory in the device is cleared,
including snapshots, keyframe effects, setup, and so on, and the device
returns to its factory default settings. However, the Network Config,
Format, Start Up, and Date/Time settings are not initialized.
Reset and Initialization (Initialize Menu)
847