Cross-Point Settings (Xpt Assign Menu) - Sony DVS-9000 User Manual

3

Cross-Point Settings (Xpt Assign Menu)

To carry out the cross-point settings, use the Panel>Xpt Assign menu.
To display the Xpt Assign menu
In the Engineering Setup menu, select VF2 'Panel' and HF2 'Xpt Assign.'
The status area shows button numbers of the cross-point buttons, and the
assigned video/key source names, and source name display color.
Assigning signals to cross-point buttons
For each button number, a pair consisting of a video signal and a key signal is
assigned. You can also assign the same signal to another button number at the
same time.
When carrying out key operations on a bank, if the key fill and key source
selection mode is set to [Auto Select], the signals are selected according to this
pair setting. (See "Selecting Key Fill and Key Source" in Chapter 4 (Volume
1).)
To assign a video signal or key signal to cross-point buttons, proceed as
follows.
1
2
90
Setup Relating to Operations From the Control Panel
In the <Key Select> group, select the keyer to be linked to the transition of
the master.
Note
Linking does not apply to a transition carried out with the downstream key
control block.
In the Panel>Xpt Assign menu, press [Source Select].
The Source Select menu appears.
The upper part of the status area shows the currently selected button
number together with the currently assigned video and key signal names.
The lower part shows a list of the signals which can be assigned.
Turn knob 1, to select the button to which the assignment relates.
Knob Parameter Adjustment
1 Button No Cross-point button selection
Setting values
1 to 128