Shot Box Register Editing - Sony DVS-9000 User Manual

Shot Box Register Editing

You can carry out the following editing on shot box registers.
• Lock: Write-protect the contents of the register.
• Copy: Copy data from one register to another.
• Move: Move data from one register to another.
• Swap: Swap the contents of two registers.
• Delete: Delete the contents of a register.
• Name: Attach a name to a register.
The procedures for shot box register editing are similar to the procedures
described in "Snapshot Register Editing" (see page 58). Unlike in effect
register editing, however, it is not necessary to specify a region in shot box
register editing. When copying, moving or swapping data between shot box
registers, select the source and destination registers using one of the following
methods.
• Set the following parameters.
Knob
1
2
• In the status area select the shot box registers for which you want to make the
setting.
To cancel the selection: Press the selected shot box register again, reverting
it to normal display.
Parameter Adjustment
From Reg Shot box register number of copy source
To Reg Shot box register number of copy
destination
Setting values
1 to 99
1 to 99

Shot Box Register Editing

71