Samsung DCS Technical Manual page 93

SAMSUNG DCS
TECHNICAL MANUAL
MMC 401:
DESCRIPTION:
Used to select the mode of the CO line. If the PBX mode is chosen, this allows PBX access codes to be
recognised, thus allowing more complete toll restriction. This mode is assigned on a per-trunk basis. If a
trunk requires the use of the RECALL key, it must be set to PBX mode.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ANS/RLS
ACTION
1. Press TRSF 401
Display shows
2. Dial trunk number (eg., 704)
Use UP or DOWN to scroll through trunk
numbers and press RIGHT soft key to move
cursor
Press ANS/RLS to select ALL
3. Dial 1 for PBX or 0 for CO
Use UP or DOWN to scroll through options
Press RIGHT soft key to return to step 2
above
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 93 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
OR
OR
ALL TRUNKS CO LINE
NONE
PROGRAMMING
CO/PBX Line
DISPLAY
[701] PBX LINE
CO LINE
[704] PBX LINE
CO LINE
[ALL] PBX LINE
?
[704] PBX LINE
PBX LINE
May 2002
SECTION