Samsung DCS Technical Manual page 139

SAMSUNG DCS
TECHNICAL MANUAL
MMC 502:
DESCRIPTION:
Allows certain station timer values to be changed on a per-station basis or for all stations. It is not advisable
to change these values without assistance from Technical Support.
1 NO ANS FWD
2 DTMF DUR.
3 F - DGT DELY
NOTE: It is reasonable for the Technician to use trial and error to find a suitable value for 2 and 3 above
according to the characteristics of the selected VM system.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
ANS/RLS
ACTION
1. Press TRSF 502
Display shows
2. Dial station number (eg., 205)
OR
Press UP or DOWN key to select station and
press RIGHT soft key
Press ANS/RLS to select all stations and
press RIGHT soft key
3. Enter the new value (must be three digits)
via dial key pad (eg., 020)
System will return to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA: NO ANS FWD
RELATED ITEMS:
Page 139 of 287 Updated I&M
This timer controls the how long the station will ring before Forward on no
answer takes place. (Range: 001- 255 sec.)
This timer governs the duration of DTMF digits which are transmitted to an
external VM system port. It will be useful when some of VMS system fails to
accept valid DTMF digit being transmitted from DCS system through SLT
port. (Range: 100 - 9900 msec.)
This timer allows the technician to insert a suitable delay prior to generating
DTMF digits, for use with VMS In Band Integration. (Range: 00- 9900 msec)
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to select ALL
OR
OR
DTMF DURATION
FIRST DGT DELAY
MMC 102 Call Forward
MMC 207 Assign VM/AA Port
Station Timer
DISPLAY
[201] NO ANS FWD
010 SEC →
[205] NO ANS FWD
010 SEC →
[ALL] NO ANS FWD
010 SEC →
[205] NO ANS FWD
010 SEC → 020
015 SEC
100 MSEC
600 MSEC
PROGRAMMING
SECTION
May 2002