Samsung DCS Technical Manual page 240

SAMSUNG DCS
TECHNICAL MANUAL
MMC 732:
DESCRIPTION:
This MMC gives more flexibility to the system by making desired Digit Translation Table, which performs the
translation from dialled digit(s) into destination parts.
Destination parts could be an Intercom number, station group, REPEAT, Change Greeting Message Code
and AA Plan Table.
If you selected as REPEAT, dialled digit may be bypassed without translating.
AA TRAN TABLE 01 and 02 can have up to 100 entries each.
The other tables(03-12) have a 25 entries.
DESTINATION :
STATION, STATION GROUP, AA TRAN NO, REPEAT and
CHANGE GREETING MESSAGE CODE
If you press A Button in DESTINATION field you are able to enter AA TRAN NUMBER. When you wish to
enter the same index number( 01-12) of AA TRAN TABLE as being programmed index number, then the
system will not accept with the indication of
"NOT PERMIT" on LCD. For instance, if you are in the below step;
AA TRAN TB (02)
001 : → _
If you press A Button then LCD will show P;
AA TRAN TB (02)
001 : → P_
if you enter the same table index number 02 which is being programmed one;
AA TRAN TB (02)
001 : → P02
then you will hear error tone and LCD will show as follows;
AA TRAN TB (02)
NOT PERMIT
If you press B Button in DESTINATION field you are able to enter REPEAT.
If you press C Button in DESTINATION field you are able to enter CHANGE GREETING
MESSAGE CODE.
If the digits programmed as a destination are a voice mail port the voice mail port will receive an in-band
packet of DTMF equal to [FWD from EXTENSION NUMBER DIALED].
ACTION
1. Press TRSF 732
Display shows
Page 240 of 287 Updated I&M
PROGRAMMING
AA Trans Table
DISPLAY
AA TRAN TB (01)
001 : 0 → 500
May 2002
SECTION