Samsung DCS Technical Manual page 17

SAMSUNG DCS
TECHNICAL MANUAL
MMC 105:
DESCRIPTION:
Allows the system administrator or technician to program the personal speed dial locations assigned to a
station. This must be done for single line telephones because these stations cannot access programming.
Each station may have up to 50 locations or bins assigned to it in MMC 606 Assign Speed Block. The speed
dial bins are numbered 00 - 49. Each speed dial number should consist of a trunk or trunk group access code
followed by a separator and up to 18 digits to be dialled. These dialled digits may consist of 0-9, [ and #. If the
system recognises a valid trunk or trunk group access number, it will automatically insert the separator.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
B
C
D
E
F
ACTION
1. Press TRSF 105
Display shows
2a. Dial station number (eg. 205)
Press UP or DOWN to select station
Press RIGHT soft key to move cursor
Press LEFT soft key to go to step 4
2b. If selected station has no speed dial
bins, the display will be as shown and
a new station may be selected
3. Dial location number (eg., 05)
Press UP or DOWN to select location
Press RIGHT soft key to move cursor
Press LEFT soft key to return to step 2
4. Enter trunk access code (eg., 0)
followed by the number to be dialled
(eg., 4264100)
Press the RIGHT soft key to return to step 2
Press the LEFT soft key to return to step 3
Press HOLD button to clear an entry
If an error is made, use DOWN arrow to step
Page 17 of 280 DCS & DX I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to insert a flash code "F"
Used to insert a pause code "P"
Used to insert a pulse/tone conversion code "C"
Used to mask/unmask following digits (shows as "[ " or " ]")
Used to enter name for speed dial bin (see MMC 106)
OR
OR
OR
OR
OR
OR
PROGRAMMING
Station Speed Dial
DISPLAY
[201] SPEED DIAL
00 :
[201] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05 : _
[205] SPEED DIAL
05 : 0-4264100_
August 2001
SECTION