Samsung DCS Technical Manual page 155

SAMSUNG DCS
TECHNICAL MANUAL
MMC600:
DESCRIPTION:
Used to assign members to the operator group. There are several options that can be selected for ringing,
overflow, group transfer and overflow destination. There are a maximum of 32 members allowed in one
group. The operator group is automatically assigned group number 500.
Note: In DCS/Compact System: maximum 30 of members are allowed in one group.
FEATURE KEYS
0 RING
1 OVERFLOW
2 GRP TRSF
3 NEXT PORT
4 MEMBER
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
2 UNCONDITION
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 600
Display shows
2. Dial feature option (0–4, eg., 3)
OR
Press RIGHT soft key to select option and move cursor to
next step
3 Press RIGHT soft key to move cursor
4. Dial in value for port (eg., 205)
If valid entry, system returns to step 2
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
Page 155 of 287 Updated I&M
Ring mode
Overflow time
Group transfer time
Overflow port
Group member (eg., station 202)
The first idle station listed in the group will ring. If the first is busy, the next
idle station will ring.
The first call will ring the first station listed in the group. The next call will ring
the next station listed in the group.
All the stations listed in the group will ring. Busy stations will receive off-hook
ring (MAX 32 STATIONS RINGING).
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Assign Operator Group
DISPLAY
[500] OPER.GROUP
RING:UNCONDITION
[500] OPER.GROUP
NEXT PORT:NONE
[500] OPER.GROUP
NEXT PORT:NONE
[500] OPER.GROUP
NEXT PORT:205
PROGRAMMING
SECTION
May 2002