Samsung DCS Technical Manual page 127

SAMSUNG DCS
TECHNICAL MANUAL
MMC 425:
DESCRIPTION:
Assigns PSTN trunks to CID trunks. The options are Normal or CID (CLIP) TRUNK. Not forr DX408.
NOTES:
1. For the DCS it refers to CLIP rather than CID.
2. DCS 70 hardware requirements are the 3TRK card and either the MISC1 or MISC2 card.
3. DCS system require Version 5.X software or later.
4. DCS hardware requirements are the 8TRK CID card and Expansion A1 card.
5. DCS24 requirements are either 4TRK24 or 6TRK24 and SIM24 card
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRSF 425
Display show
2. Dial Trunk number (eg.,707)
3. Press UP or DOWN key to make selection
Press RIGHT soft key to enter and return
To step 1
Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
Page 127 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
All Trunks set to NORMAL TRUNK
MMC 119 SET CLIP DISPLAY
MMC 728 ASSIGN CLIP TRANSLATION TABLE
PROGRAMMING
Assign CID Trunk
DISPLAY
[701] CID TRUNK
NORMAL TRUNK
[707] CID TRUNK
NORMAL TRUNK
[707] CID TRUNK
CID TRUNK
May 2002
SECTION