Samsung DCS Technical Manual page 249

SAMSUNG DCS
TECHNICAL MANUAL
MMC 738:
DESCRIPTION:
This MMC is used for deleting the saved information of registered DECT handsets
There are three modes to clear registered information:
•
FORCED mode.
When this mode is programmed, the DCS system clear the information of registration without
reference to the handset.
•
MANUAL mode.
Whenever DCS system wants to clear the registration of DECT handset, DCS system receive
confirmation from DECT handset. If the confirmation is SUCCESS, the system will clear the
registration of the DECT handset ( If the confirmation fails, the system can't clear the information).
•
ZAP mode.
Whenever DCS system wants to forbid the use of a specific DECT handset, DCS system must
select this mode. (This method is different from FORCED mode)
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 738
Display show
2. Dial DECT handset number (eg., 7903)
3. Press UP or DOWN key to select MODE and
press RIGHT soft key to move cursor
4. Dial 1 for YES or 0 for NO
Press UP or DOWN key to select YES/NO
and press RIGHT soft key
5. Dial 1 for YES or 0 for NO
Press UP or DOWN key to select YES/NO
and press RIGHT soft key
Press TRSF to store and exit
Press SPK to store and advance to next
Page 249 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
DECT Clear Registration
DISPLAY
[7901] DECT CLEAR
MODE: FORCED
[7903] DECT CLEAR
MODE: FORCED
[7903] DECT CLEAR
MODE: NORMAL
[7903] DECT CLEAR
DECT CLEAR
[7903] DECT CLEAR
ARE YOU SURE? : NO
[7903] DECT CLEAR
MODE: FORCED
PROGRAMMING
SECTION
: NO
May 2002