Samsung DCS Technical Manual page 179

SAMSUNG DCS
TECHNICAL MANUAL
MMC 703:
DESCRIPTION:
Provides a way to make toll restriction very easy and flexible. There are 200 entries allowable in the allow
table and each entry index can be assigned to a class of service. Each index can have up to twelve digits.
With the use of wild cards (MMC 704 Assign Wild Character), more flexibility can be built into toll restriction.
There are six toll levels, B through G, that are programmable. Toll level A is set as unrestricted by default,
and toll level H is set as in house only by default.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
WILD CARD KEY
BUTTON DIAL WILD CARD
19 0 X
20 1 Y
21 2 Z
ACTION
1. Press TRSF 703
Display shows
2. Dial in index number 001-200 (eg., 005)
pad toll pattern (eg., 212)
OR
Enter wild card (eg., 21X) from above list
and press RIGHT soft key to move cursor to
COS options
3. Press UP or DOWN key to move cursor
along line until under toll class mark (eg., E)
Enter a 1 for YES or 0 for NO and press
RIGHT
soft key to return to step 1
Press LEFT soft key to return to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
Page 179 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
OR
OR
OR
Toll Allow Table
DISPLAY
ALOW (001) : B C D E F G
ALOW (005) : B C D E F G
_
ALOW (005) : B C D E F G
212
ALOW (005) : B C D E F G
21X
ALOW (001) : B C D E F G
212
PROGRAMMING
SECTION
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 0 0 0
0 0 0 1 0 0
May 2002