Samsung DCS Technical Manual page 266

SAMSUNG DCS
TECHNICAL MANUAL
MMC: 756
DESCRIPTION:
This MMC is only used for the Cadence and Cadence Lite Plug in Voice Mail Cards.
This MMC is used to assign each a Music on Hold source for the DCS from a sound file located on the
CADENCE hard disk drive. The 100 available sound files are defined as numbers 5000 to 5099.
Basically CADENCE card supports various music for numbers 5000 to 5099. If you want to use default
CADENCE support music, select the number. Otherwise, make sure you record the sound file first. The next
step is to assign the sound file to a CADENCE port. For example, if you record sound file 5025 you would
associate 25 with a specific CADENCE port, e.g. 225. This will dedicate the port for use only as MOH and
remove it from group 529 (for Cadence) or 519 (for Cadence Lite) . Now 225 will show up as a valid music
source in MMC 308, 309 and 408.
Each Music on Hold source assigned here requires one CADENCE port.
NOTE: If the first CADENCE port is used for VMMOH, it must be disabled before boot up since CADENCE
/CADENCE LITE and the DCS use port 1 during boot up to exchange critical information. For this reason we
suggest you use the last port as VMMOH ports.
PROGRAM KEYS
UP & DOWN
KEYPAD
SPK
HOLD
ACTION
1. Press TRSF 756
Display shows
2. Press UP or DOWN to select CADENCE port.
3. Move cursor to next field. Press UP or DOWN to select
sound file.
4. Press TRSF button to store and exit
OR
Press SPK button to store and advance to next MMC
DEFAULT DATA: NOT USED
RELATED ITEMS: None
Page 266 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Used to store data and advance to next MMC
Used to delete an entry
Assign Cadence MOH
DISPLAY
SET VMMOH
209: NOT USE
SET VMMOH
215: NOT USE
SET VMMOH
215: 25
PROGRAMMING
SECTION
May 2002