Download Print this page

Samsung DCS Technical Manual page 75

Hide thumbs Also See for DCS:

Advertisement

SAMSUNG DCS
TECHNICAL MANUAL
MMC 308: Assign Background Music Source
DESCRIPTION:
Assigns a background music source to the DCS keysets. The DCS supports 1 music source per Trunk A
card installed in the system. The system must have a Trunk A card installed to provide a BGM source. The
default directory number of a background music source is 3701-3738.
NOTE: Internal music is always the odd numbered address, ie., 3701, 3703 and the external music source is
always the even numbers ie. 3702, 3704.
On Version 5.X DCS software a trunk port of an 8TRK CID card can be used as a BGM port ie. 7XX
On the DCS 70 & Compact there are 3 possible sources: None, 371,372. On the DCS24 the music source is
on the base board (switch select internal/external). The default directory number of the DCS24 background
music source is 371.
You may also select an Auto Attendant (AA) port to provide continuous play of a specific recording. The AA
port selected must be the last port on the card. If selected, the BGM source will be the message defined in
MMC 736 from the port defined in this MMC. When MOH MSG number does not defined in MMC 736, that
AA port number will not be selected in this MMC.
If you have a CADENCE Voice Mail System installed you may also select a CADENCE recording as a music.
The recording must already been defined in MMC 756 and will show up here as the CADENCE port assigned
with the recording.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1.
Press TRSF 308
Display shows current setting
2.
Dial keyset number (eg., 205)
Use UP or DOWN to scroll through keyset
numbers and press RIGHT soft key to move
the cursor
Press ANS/RLS to select all stations
3.
Enter source number (eg., 3701)
Press UP or DOWN key to make selection
and press RIGHT soft key to return to step 2
4.
Press TRSF to store and exit
DEFAULT DATA:
Page 75 of 287 Updated I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear previous entry
Used to select ALL
OR
OR
OR
OR
Press SPK to store and advance to n
NONE apart from DCS24 - 371
PROGRAMMING
DISPLAY
[201]
BGM SOURCE
BGM SOURCE : NONE
[205]
BGM SOURCE
BGM SOURCE : NONE
[ALL]
BGM SOURCE
BGM SOURCE : ?
[205]
BGM SOURCE
BGM SOURCE : 3701
May 2002
SECTION

Advertisement

loading