Samsung DCS Technical Manual page 47

SAMSUNG DCS
TECHNICAL MANUAL
MMC 205:
DESCRIPTION:
Designates the station that controls the loud bell ring output of a Trunk A card. Each Trunk A card has one
loud bell output; these outputs are given a DN of 3901-3920 DCS, 363-365 DCS 70 and 362 DCS24 / DX408
as a default value to enable them to be assigned.
The loud bell will follow the ring cadence of the designated station. Only a station can be assigned to control
the loud bell; a station group cannot be assigned.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 205
Display shows current setting
2. Dial loud bell number (eg., 3902)
Use UP or DOWN to scroll through loud
bell numbers and press RIGHT soft key
to move the cursor
3. Enter station number (eg., 201)
Press UP or DOWN key to make selection
press RIGHT soft key to return to step 2
4. Press TRSF to store and exit
Press SPK to store and advance to next
MMC
DEFAULT DATA:
RELATED ITEMS:
DCS70 RELATED ITEM:
Note:
Page 47 of 280 DCS & DX I&M
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Clears previous entry
OR
OR
and
OR
UNASSIGNED
NONE
MMC 219 COMMON RELAY SERVICE TYPE
This MMC is not applicable to DCS Compact System
PROGRAMMING
Assign Loud Bell
DISPLAY
[3901] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR : NONE
[3902] LOUD BELL
RING PAIR : 201
August 2001
SECTION