Samsung DCS Technical Manual page 165

SAMSUNG DCS
TECHNICAL MANUAL
MMC 604:
DESCRIPTION:
Allows the technician to assign a keyset to any of the four internal paging zones and all call page (page plus
∗). The total number of keysets that can receive a page is limited to 80. A keyset may be assigned to more
than one zone.
The assignment is controlled by the use of class marks. If a keyset is flagged as "1" in a zone column, it will
receive pages for that zone. If the keyset is flagged as "0," it will not receive pages for that zone. Keysets can
receive pages for more than one zone or can be programmed not to receive an all call page.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPK
HOLD
ACTION
1. Press TRSF 604
Display shows
2. Enter index number (01–80, eg., 05) via dial key pad
OR
Press UP or DOWN key to make selection And press
RIGHT soft key to move cursor
3. Enter station number (eg., 205) via dial key pad
OR
Press UP or Down key to make selection and press
RIGHT soft key to move cursor
4. Move cursor under page zone desired by pressing UP or
DOWN key and enter the digit 1 under zone and press
RIGHT soft key to return to step 2 to continue with entries
5. Press TRSF to store and exit
OR
Press SPK to store and advance to next MMC
DEFAULT DATA:
RELATED ITEMS: NONE
Page 165 of 287 Updated I&M
Assign Station To Page Zone
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next MMC
Used to clear entry
ALL STATIONS ASSIGNED TO ZONE 1
ALL ZONE IS SET
PROGRAMMING
DISPLAY
ENTRY:STN :1234∗
01:NONE:00001
ENTRY:STN :1234*
05:NONE:00001
ENTRY:STN :1234∗
05:205 :00001
ENTRY:STN :1234∗
05:205 :01001
May 2002
SECTION