Samsung DCS Technical Manual page 138

SAMSUNG DCS PROGRAMMING
TECHNICAL MANUAL SECTION
OHVA ANSWER TIME: This timer controls the time duration of an OHVA call before automatic rejection.
DCS 70 – OVERLAP INT DGT: This timer controls the grace period between receiving address information
in overlap receiving mode via BRI / PRI line. After expiration of this timer the system operator will be alerted.
PAGE TIME OUT: This timer controls the maximum duration of a page announcement.
PAGE TONE TIME: This timer controls the duration of tone burst heard over the page prior to the page
announcement.
PARK RECALL TIME: This timer controls the duration of time a call is parked before recalling to the call park
originator.
PC-MMC LOCK OUT: This timer monitors the PCMMC activity. When the timer expires, the PCMMC link is
dropped and the DCS system is returned to secure program status.
POWER DOWN TIME: This timer monitors the power to the ROM pack to begin shutdown status.
RECALL DISCONNECT: This is the time an attendant recall will ring before being disconnected.
RECALL WAIT TIME: This is the time any recall (hold or transfer) continues to recall at your station before it
recalls to the operator.
SMDR START/DIAL PULSE(ROTARY): This timer starts SMDR recording for rotary dialling. This timer also
controls the LCD duration timer on the keysets. The duration time displayed and the SMDR time duration is
the same.
SMDR START/DTMF: This timer starts SMDR recording for touch-tone dialling. This timer also controls the
LCD duration timer on the keysets. The duration time displayed and the SMDR time duration is the same.
SYS HOLD RECALL: This timer determines the time calls can be left on hold before recalling back to the
holding station. This is a system-wide timer. Setting timer to 000 will disable this feature and no recalling will
take place.
TRANSFER RECALL: This timer determines the time transferred calls ring before recalling. This is a system-
wide timer.
UCDS AUDIO ALARM: This timer determines when to operate an audio alarm for the UCD supervisor if the
longest waiting call has reached this time.
UCDS VISUAL ALAM: This timer determines when to operate a visual alarm for the UCD supervisor when
the longest waiting call has reached this time.
VOICE DIAL DELAY: This timer monitors the duration of the interaction between main software and voice
dialler.
Page 138 of 287 Updated I&M May 2002