Canon 1000 Service Manual page 415

Step
12 Fix the control card to the control panel
using four self-tapping screws.
At this time, slide in and out a card, and
fix the control card where the card
slides in and out easily.
Further, check that the printer
connector is centered over the hole.
13 Fix the grounding wire of the control
card to the control panel.
14 Disconnect the short connector for the
control card behind the control panel;
then, connect the connector (4P) of the
control card.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Screws
Screw
Screw
Grounding wire
Control panel back cover
Short connector
Control panel back cover
Control card connector
5. INSTALLATION
Control Card V
Screw
5-41