Pre-Fixing Feeding Assembly; Pre-Duplexing Feeding Assembly; Removing The Pre-Fixing Feeding Assembly; Removing The Pre-Duplexing Feeding Assembly - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
E. Pre-Fixing Feeding
Assembly
1. Removing the Pre-Fixing Feeding
Assembly
1) Remove the left cover.
2) Slide out the fixing unit and the transfer unit.
3) Remove the two screws [1].
[1]
Figure 4-301E
4) Disconnect the two connectors [2], and shift
the pre-fixing feeding assembly [3] to the front
and slide it out from the delivery side.
Figure 4-302E
4-38
COPYRIGHT © 2001 CANON INC.
[3]
[2]
F. Pre-Duplexing Feeding
Assembly
1. Removing the Pre-Duplexing
Feeding Assembly
1) Open the front cover, and release the pre-
duplexing feeding assembly.
2) Remove the two screws [1], and remove the
grip [2] and the plate [3] from the pre-
duplexing feeding assembly.
3) Lower the duplexing feeding assembly lifter
plate [4], and hook it on the cut-off [5].
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[1]
[3]
[2]
Figure 4-301F
[4]
[5]
Figure 4-302F