Pick-Up Drive Assembly; Removing The Developing Motor; Outline - Canon 1000 Service Manual

4. MECHANICAL SYSTEM

2. Removing the Developing Motor

1) Remove the rear cover 1 and the rear cover 2.
2) Remove the two screws, and remove the fly
wheel (left). (This applies only when removing
the M developing motor.)
3) Remove the four screws each [1], and
disconnect the two connectors each [2]; then,
remove the developing motor [3].
[1]
[2]
Figure 4-203B
4-12
COPYRIGHT © 2001 CANON INC.
[1]
[3]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
C. Pick-Up Drive Assembly

1. Outline

See Figure 4-201C for how the pick-up
drive belt is routed.
Figure 4-201C