Laser And Safety Measures; Dhhs; Cdrh - Canon 1000 Service Manual

III. LASER AND SAFETY
MEASURES
A. DHHS
The CLC1000 has been approved as Class 1
equipment under the Radiation Performance
Standards of the Department of Health and Human
Services (DHHS), established in the U.S.A. in
1968.
The approval represents that the product has
shown to be free of harmful laser beams; the
optical system of the product is designed such that
the laser beams are confined in a protective
housing and cannot escape the product while in
use.
CLASS 1
LASER PRODUCT
APPAREIL
A RAYONNEMENT
LASER DE CLASSE 1
LASER KLASSE 1
PRODUCTO LASER DE CLASE 1
APPARECCHIO LASER DI CLASSE 1
IN ACCORDO CON LA NORMA
CEI 76-2
Figure 1-301
COPYRIGHT © 2001 CANON INC. CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
1. GENERAL DESCRIPTION
B. CDRH
On August 2, 1976, the Center for Devices
and Radiological Health (CDRH) of the Food and
Drug Administration of the U.S.A. put an act in
force to deal with laser devices.
Under the act, laser devices manufactured on
and after August 1, 1976, may not be marketed in
the United States without approval.
Figure 1-302 shows the label which serves as
proof of approval under the act; the label is
required to be attached to all laser devices
marketed in the U.S.A.
CANON
30-2, SHIMOMARUKO, 3-CHOME, OHTAKU, TOKYO,
146, JAPAN.
MANUFACTURED:
THIS PRODUCT CONFORMS WITH CQRH RADIATION
PERFORMANCE STANDARD 21CFR CHAPTER 1
SUBCHAPTER J.
Figure 1-302
Some descriptions may not apply to
certain product models.
1-9