Image Position Correcting Mirror Unit; Removing The Y Image Position Correcting Mirror Unit - Canon 1000 Service Manual

4. MECHANICAL SYSTEM
B. Image Position Correcting
Mirror Unit
1. Removing the Y Image Position
Correcting Mirror Unit
1) Make preparations for parts associated with
the laser unit (See chapter 4. VI. LASER
SYSTEM, A-1. Making Preparation for Laser
Unit-Related Parts).
2) Remove the two cable mounting screws [1]
and the cable clamp [2]; then, remove the two
cover mounting screws [3], and remove the
image position correcting mirror cover (right)
[4].
[2] [1]
[3]
Figure 4-601B
4-64
COPYRIGHT © 2001 CANON INC.
[2] [1]
[2]
[4] [3]
3) Disconnect the two connectors [5], and
remove the five screws [6]; then, remove the Y
image position correcting mirror unit [7]. (Take
care not to drop the washers from the screws.)
[5]
[6]
[6]
[6]
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
[7]
<A>
Figure 4-602B (rear)
<A>
[6]
Figure 4-603B (front)
Never remove the screw <A> used
to keep the butting plate of the im-
age position correction mirror unit in
place. Otherwise, the position of the
mirror unit will be lost.
[6]