Removing The Lower Fixing Heater; Removing The Upper Fixing Roller - Canon 1000 Service Manual

4. Removing the Lower Fixing Heater

1) Open the front cover (left), shift down the
fixing lever, and slide out the fixing unit.
2) Remove the fixing assembly knob (1 screw),
and remove the fixing assembly lever (2
screws).
3) Remove the two screws, and remove the
fixing assembly front cover.
4) Pull out the faston [1] (rear) of the lower fixing
heater.
Figure 4-1008A
COPYRIGHT © 2001 CANON INC.
[1]
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
4. MECHANICAL SYSTEM
5) Pull out the faston [2] (front) of the lower fixing
heater, and remove the screw [3] to remove
the metal fixing [4].
[2]
Figure 4-1009A
6) Pull out the lower fixing heater to the front.

5. Removing the Upper Fixing Roller

1) Open the upper fixing roller unit (See chapter
4. X. FIXING SYSTEM, A-2. Opening the
Upper Fixing Roller Unit).
2) Remove the upper fixing heater (See chapter
4. X. FIXING SYSTEM, A-3. Removing the
Upper Fixing Heater).
3) Remove the upper fixing roller metal fixing [1]
(one each from front and rear).
Figure 4-1010A
[4]
[3]
[1]
4-97