Installation; Unpacking; Ii. Installation - Canon 1000 Service Manual

II. INSTALLATION

When a metal object is brought in from a cold to a warm place, droplets of water can develop on its
surface. This phenomenon is known as condensation, and copiers subjected to condensation tend to
generate faulty images.
If the copier has been brought in from a cold place, leave it alone at the site of installation for at least one
hour before starting the work.
A. Unpacking
Step
1 Cut the two bands used to hold the
shipping box, and free the shipping box.
2 Tear off and remove the plastic bag.
3 Turn the nuts, and remove the metal
fixings (2 each at front and rear) used
to keep the skids.
COPYRIGHT © 2001 CANON INC.
Work
CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Bands
Nuts
(rear)
Nuts

5. INSTALLATION

Shipping box
(front)
Metal fixings
Metal fixings
5-3