Canon 1000 Service Manual page 386

5. INSTALLATION
Step
26 Press 'INSTALL' twice to select screen
2.
DISP COUNTER
ADJUST
FUNC
OPTION
TEST
27 Press LSNS-KIL
28 Wait until warm-up ends.
During the wait period, perform the
following:
• Set the cassette size to suit the needs
of the user.
• First, set the side guide plate to suit
the paper size. Then, put paper in the
cassette, and adjust the trailing edge
guide plate against the trailing edge of
the paper.
• Remove the cassette size plate from
each cassette, and attach the
appropriate size label; then, put the
cassettes back into their original
positions.
• Install the original tray.
If you are installing a paper
deck, you must remove the
rear right cover. Be sure to
install the paper deck before
installing the original tray (if
on the right side).
29 Lift the hopper assembly as far up as it
goes.
5-12
COPYRIGHT © 2001 CANON INC.
Work
<M>
INSTALL
AUTO-REG LSNS-KIL
0
REG-APER
to select '1'.
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
<S> <R>
2/4
0
Stepped screws
(face sticker is
attached to the
screw hole
Stepped screws
Original tray
(face sticker is attached
to the screw hole)
Screws
(face sticker is
attached to the
screw hole)
Remarks
<P> <F>
Original tray
Screws
(face sticker is attached
to the screw hole)