Relocating The Machine - Canon 1000 Service Manual

5. INSTALLATION
III. RELOCATING THE MACHINE
Step
1 Tape the cover of the toner hopper in
place.
Install the scanner metal fixing.
• Insert the metal fixing through the
louver on the delivery side, and slide it
to the rear to fix the scanner mirror
mount in position.
Tape the metal fixing in place.
2 Open the copier's front cover (right/left).
3 Release the lever of the fixing unit, and
slide out the fixing unit.
4 Open the external delivery unit and the
internal delivery unit; remove the fixing
assembly lever (2 screws), fixing
assembly knob (1 screw), and fixing
assembly front cover (2 screws); then,
remove the fixing assembly front cover.
5 Loosen the two screws, and open the
fixing assembly.
6 Remove the two screws, and open the
fixing assembly.
7 Remove the screw from the rear of the
upper oil pan; then, wait until all fixing
oil has collected in the oil tank.
5-36
COPYRIGHT © 2001 CANON INC.
Work
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
Scanner metal fixing
Fixing assembly
upper cover
Screw
Knob
Screw
Screw
Fixing assembly
front cover
Fixing assembly
lever Screws Screw
Screw Fixing assembly
Screw
Screw