Canon 1000 Service Manual page 235

Cassette 1
pick-up roller clutch (CL12)
Pick-up vertical
path 2 sensor (PS25)
Pick-up vertical
path 1 sensor (PS21)
Registration
paper sensor (PS1)
Registration
roller clutch (CL8)
Post-registration
paper sensor (PS14)
Separation sensor (PS15)
Internal
delivery sensor (PS35)
Delivery sensor (PS34)
Delivery vertical
path 1 sensor (PS38)
Delivery vertical
path 2 sensor (PS32)
Duplexing reversal motor (M28)
Duplexing
reversal sensor (PS33)
Pre-holding
tray feeding sensor 1 (PS8)
Pre-holding tray
feeding sensor 2 (PS9)
Holding tray paper sensor 1
(PS30)
Holding tray
paper sensor 2 (PS31; Note)
Cassette 2
pick-up roller clutch (CL14)
Pick-up vertical
path 3 sensor (PS26)
• A4/LTR, 2 Copies, 4-Color, Direct, Cassette
COPYRIGHT © 2001 CANON INC.
Start key ON
STBY
CNTR
1.0
1.6
3.2
0.4
1.0
Note: The message 'JAM' appears on the control panel if the holding tray paper sensor 2 (PS31) detects
paper at such times as not programmed.
CANON CLC1000/1000S/3100 REV.2 MAY 2001 PRINTED IN JAPAN (IMPRIME AU JAPON)
COPY
1.7
5.5
8.6
9.1
9.1
10.1
2.4
: Delay jam check (normal if paper found)
: Stationary jam (normal, if paper not found)
Figure 3-657
3. OPERATION AND TIMING
(unit: sec)
LSTR
1.6
0.9
CW
CWW
rotation
rotation
0.4
1.3
1.6
0.6
1.6
STBY
3-191