Section 11 Ml440/Ap300 Cordless Handset; Connecting The Base Station; Install The Base Station - NEC Univerge SV9100 Hardware Manual

Issue 1.2
ML440/AP300 C
S 11
ECTION
The ML440/AP300 chapter outlines the steps for connecting and mounting the base
station, charging the battery and powering on the handset.
11.1
5 - 146
ORDLESS HANDSET

Connecting the Base Station

If your network connection does not provide Power Over Ethernet, you will need to
.
order a base station AC adapter and a standard Ethernet-to-PoE adapter. Contact
Customer Service.
Figure 5-171 Views of AP300 Base Station mounted horizontally.
11.1.1

Install the Base Station

1. Connect a standard Ethernet cable (Cat 5 or higher) to the
Ethernet/PoE jack on the rear of the base station.
Installing DT Series Digital and IP Multiline Terminals
UNIVERGE SV9100