Do Not Disturb (Dnd); Auto Handset/Auto Headset; Figure 3-13 Do Not Disturb Screen - NEC SL1100 Manual

Issue 1.0
___________________________________________________________________________________
1.17
1.18
___________________________________________________________________________________
3 - 12

Do Not Disturb (DND)

The Do Not Disturb function allows the user to set their phone to block
incoming calls. When the Do Not Disturb function is selected, the following
dialog will be displayed (refer to
The Do Not Disturb dialog allows the user to either set DND or clear a

previous DND setting.
When "Set Do Not Disturb" is selected, the user can specify the DND

condition using the "Applies to:" field.
The available DND options presented in the "Applies to" field are:

All Calls

Outside Calls

Paging/Intercom/Forwards/Transfers

Call Forwards

The "Cancel Do Not Disturb" is selected to remove a previous DND

setting.
Selecting the Start button will initiate the requested DND operation.

Selecting the Cancel button will close the Do Not Disturb dialog without

processing the DND request.

Auto Handset/Auto Headset

The Auto Handset/Auto Headset button is a toggle button that switches

between using the Handset or Headset for making outgoing calls and
answering incoming calls. A
phone (15-07-01).
The Auto Handset/Auto Headset button is only available when the phone

is in an idle state. Toggling between Handset and Headset is not
supported during an active call.
Figure 3-13 Do Not Disturb

Figure 3-13 Do Not Disturb Screen

Headset button must be programmed on the

SL1100
Screen).
Toolbar Functions