10.12 Attaching And Removing The Belt Clip - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100

10.12 Attaching and Removing the Belt Clip

System Hardware Manual
3. Place the charging unit on the posts of the wall screws and push down
until it is firmly seated.
Figure 5-165 Placing the Charging Unit on the Wall
4. Plug the AC adapter into a standard 230 Vac wall outlet. Refer to
5-165 Placing the Charging Unit on the
A belt clip can be used to attach the handset to a belt or pocket for convenient
portability.
1. Slide the clip into the tab slots. Press firmly until it snaps into place. The
belt clip fits snugly onto the handset.
Figure 5-166 Attaching the Belt Clip to the Handset
Wall.
Issue 1.2
Figure
5 - 143