UNIVERGE SV9100
System Hardware Manual
figure below.
2.
Line up the Rack Mount Bracket(s) with the pre-drilled holes on each side of
the 19" chassis.
3.
Secure the brackets to the chassis using the supplied screws. Refer to figure
below for the 19" chassis.
Repeat for additional chassis mounting.
Figure 3-66 Rack Mount Bracket Installed 19" CHS2UG
4.
Carefully slide the chassis into desired location in the rack. Make sure the
hooks on the mounting bracket are inserted into the back of the chassis,
Stacking additional chassis (without rack mount brackets) on top
of one rack mounted chassis is not recommended.
Figure 3-65 CHS2UG Rack Mount Brackets
Issue 1.2
3 - 51