Connectors - NEC Univerge SV9100 Hardware Manual

UNIVERGE SV9100
RUN (D23)
System Hardware Manual
Table 4-8 GCD-CP10 LED Indications (Continued)
LED Indication
D20
Blinking Off
Blinking On
Blinking Blinking Blinking Blinking On Steady When
Blinking On
Blinking Blinking
On Off
3.1.5

Connectors

Table 4-9 GCD-CP10 Connections
GCD-CP10
describes the pin-outs for connectors on the CCPU-A..
Connector
J13
J4
J11/J12
J10
J6/S4
J7
J9
J14
D21 D22
On On On Steady When
USB Memory is
Installing
On On On Steady When
USB Memory is
Installing
USB Memory is
Installing
Off Off On Steady When
USB Memory is
Installing
Off Off On Steady When
USB Memory is
Installing
Off Off
Table 4-10 GCD-LTA RJ45 Cable Connector Pin-Outs
,
Table 4-9 GCD-CP10 Connections
USB Memory Connection (used for upgrading software
or downloading system data)
Ethernet Cable Connection (for PCPro or WebPro, CTI,
ACD MIS, IP Phone)
Pin Jack for External Source Connection (External
MOH, External Speaker, etc.)
External Source Control Connection
Used for Debug
SD Memory Card Connection
Backboard connection
GPZ-IPLE connection
D25
Flash memory booting error
Flash memory data error
Reading error of system
program
Error: Major alarm occured
Error: Minor alarm occured
Off System starting up
describes each connector on the
Connector Description
Issue 1.2
Status
4 - 25