NEC Univerge SV9100 Hardware Manual page 371

UNIVERGE SV9100
System Hardware Manual
10. Insert the cradle connecting cable of the Bluetooth Cradle
(BTC) into the unit connector.
Figure 5-123 Attach Bluetooth Cradle to the Multiline Terminal
11. Fit the projections on the side of the Bluetooth Cradle into the
guide holes on the side of the terminal and pull toward you
(Figure 5-123 Attach Bluetooth Cradle to the Multiline
Terminal) until the unit snaps into place.
12. Attach the side panel to the Bluetooth Cradle.
13. Press the connecting cable into the grooved cutout.
Figure 5-124 Grooved Cutout for Connecting Cable
Issue 1.2
5 - 111