Connectors - NEC Univerge SV9100 Hardware Manual

Issue 1.2
4 - 48
4.4.3

Connectors

Table 4-23 GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
show the pin-outs for the RJ-61 connector. Refer to
Installing the GPZ-4LCA Daughter Board on page 4-45
illustrations showing the location of the connectors on the SLIDB
blades.
Table 4-23
8SLIDB – CN2 (ports 9~12), CN3 (ports 13~16)
GPZ-4LCA/GPZ-8LCE/ RJ-61 Cable Connector Pin-Outs
RJ-61 Cable Connector –
48SLIDB – CN2 (ports 9~12)
Pin No.
1
2
3
4
5
6
7
8
UNIVERGE SV9100
Figure 4-12
for
Connection
T4 (Tip for port 4)
T3 (Tip for port 3)
T2 (Tip for port 2)
R1 (Ring for port 1)
T1 (Tip for port 1)
R2 (Ring for port 2)
R3 (Ring for port 3)
R4 (Ring for port 4)
Installing the SV9100 Blades