Led Indications - NEC Univerge SV9100 Hardware Manual

Issue 1.2
LED Indication
Live LED
(Green)
On
Flash (1s)
Flash (100mS)
Off
4 - 76
5.6.3

LED Indications

LED indications for the GCD-PRTA are listed in
GCD-PRTA LED
function and LED and Operational status. Refer to
GCD-PRTA LED Indication Pattern of Layer 1 on T1 Unit on page
4-77 for LED pattern information.
Table 4-40 GCD-PRTA LED Indications
Busy LED
(Red)
ON System Initialising
On The assignment of the unit is refused.
Flash (1s) Trouble found during self-diagnostics.
On Normal
Operation
Off
On Unit Busy
Off
Flash Downloading firmware.
(100ms
On/Off)
Indications. Each LED is listed with its associated
Operation Status
A Channel is busy
(use
another from CH1 ~
CHx).
All channels are idle.
A Channel is busy
(use
another from CH1 ~
CHx).
All channels are idle.
UNIVERGE SV9100
Table 4-40
Figure 4-21
Remarks
When you exceed the system
capacity.
When the main software
version is not matched.
-
-
--
-
-
-
Installing the SV9100 Blades