NEC Univerge SV9100 Hardware Manual page 401

UNIVERGE SV9100
System Hardware Manual
Figure 5-161 Placing the Telephone Cords Inside the Wall Mount Stand
5. Place the base unit on the posts of the wall screws and push down until
it is firmly seated.
Figure 5-162 Attaching the Wall Mount Unit to the Wall
6. Plug the other end of the short telephone cord into a telephone wall jack.
7. Plug the AC adapter into a standard 230 Vac wall outlet. Refer to
5-159 Plugging the AC Adapter into the AC Wall Outlet on page
Do not use an outlet controlled by a wall switch.
.
Issue 1.2
Figure
5-139.
5 - 141