Program 12 : Night Mode Setup; Night Mode Function Setup - NEC ASPILA EX Feature Manual

Program 12 : Night Mode Setup

12-01 : Night Mode Function Setup

Level:
IN
Description
Input Data
Item
Item
No.
01 Manual Night Service
Enable
02 Automatic Night Service
03 Night Mode Switch
Operating Mode
(Sensor switch on
NTCPU only)
Conditions
Feature Cross Reference
Aspila EX Software Manual
• Available.
Use Program 12-01 : Night Mode Function Setup to set up the Night Mode options. Refer to the
following chart for a description of each option, its range and default setting.
Input Data
0-off
1-on
0-off
1-on
0-disable
1-8
(operation mode)
Note: Even if the operation mode is changed manually, the operation mode changes according to
the schedule set up.
None
• Night Service
Program 12 : Night Mode Setup
12-01 : Night Mode Function Setup
Aspila EX
Default Description
1 Allows/prevents users from activating
Night Service by dialing a service
code.
1 According to a preset schedule, enable
or disable Automatic Night Service
for the system.
0 Use this option to set the operation
mode of the NTCPU Night Service
mode switch sensors (external Night
Mode Selector Switch). The Night
Service mode affects trunk inbound
and outbound routing.
Related
Program
11-10-01
12-02
12-03
12-04
Programming 513