Table 6.3 Fault Display And Contents (Communication Fault) - Samsung MOSCON-E7 User Manual

Table 6.3 Fault display and contents (Communication fault)

Code Meaning
FMT Input command is
Abnormal different from the
Format. normal format.
SUM Part of the information
Check Sum has been changed
Error. during transmission.
MEM Error in the EEPROM
Memory Fault. parameter
Modification of the
WRE
unchangeable parameter
Rejection in
during running was
Running.
rejected.
Operation is being input
EEP on EEPROM. (Other
EEPROM Busy. input command is
ignored)
MOD
Invalid Remote mode is not
Frequency /Run selected.
command mode.
6. Troubleshooting 6-7
Cause Corrective action
• The communications
command arrangement
is different from the
reguration protocol.
• The error caused by
noise, etc occurred to
the data on
communication.
• An error occurred in
the EEPROM.
• This command can
not be used in running..
• EEPROM is operating
at present.
Set the
• Invalid command in appropriate
this mode. mode.
Refer to B0.02.
6-8 MOSCON-E7 User's Manual
---------------------------------------MEMO-----------------------------------------