Table of Contents
Advertisement
2.3 Installation
2.3.1 Precautions for delivery and installation
DANGER
!
• Do not inspect components unless inside "Charge" lamp is off.
It may cause an electric shock.
• Do not remove the operator from the main body.
It may cause an electric shock.
• When using the digital operator away from the main body, use the
separated operator (E7OPTR-S).
CAUTION
!
• Be careful not to be damaged the inverter in delivering.
• Do not carry the inverter by holding the plastic parts, but hold the
heat sink.
Otherwise, the heat sink may fall and cause injury.
• Use nonflammable materials such as metal for the part where the
inverter is installed.
• When installing several inverters in a single enclosed space, install a
cooling fan to keep the ambient temperature below 45¡ É .
• Cover the inverter during installation to protect it from metal chip
coming from drilling.
2. Installation
2-5
2-6
MOSCON-E7 User's Manual
2.3.2 Installation site
Free from direct
Free from harmful
sunlight
gases and liquids
Free from ra in an d
Free from chlorides
wind, water
(In case of enclosed
wall mount t yp e)
Without excessive
Low ambient
vibration
temperature
With ou t an y ma g ne tic
Free from radioactive
noises
material
(e.g. Free from a welding
machine or power supply)
Free from oil mist and
dust
Free from dust
(In case of enclosed
wall mount type)
Ambient tem perature of
¡ © 10¡ É ¡ - 4 0¡ É
Free from combustible
material
Advertisement
Table of Contents
