Grounding; Figure 3.12 Multiple Grounding - Samsung MOSCON-E7 User Manual

• Output wiring should not touch with case.
Otherwise, it may cause an GND-fault or a short-circuit.
• Do not connect the phase advanced capacitor, LC, or RC noise filter to
the output side of Moscon-E7.
3.Wiring 3-19
3-20

3.8 Grounding

• Ground the ground terminal.
• Never ground the MOSCON-E7 in common with welding machines,
• Use the GND cable specified in the technical standards for electrical
• When several MOSCON-E7 are used, ground each unit as shown
MOSCON-E7 User's Manual
motors, or other electrical equipment. Separate the ground cable from
the high voltage equipment wiring.
facilities. Wire the cable as short as possible.
below. Do not loop the ground as example ¨ Ï .
Good
Good
¨ Í ¾ ç È £ ¨ Î ¾ ç È £

Figure 3.12 Multiple grounding

Poor
¨ Ï ³ ª » Ý