Lenovo ThinkSystem SR665 V3 User Manual page 70

Figure 26. Installing the air baffle filler
Step 3. Align the tabs on both sides of the air baffle with the corresponding slots on both sides of the
chassis. Then, lower the air baffle into the chassis and press the air baffle down until it is securely
seated.
Figure 27. Installing the air baffle
After you finish
1. Reconnect the cable of the RAID flash power module if you have disconnected it. See
"Internal cable routing" on page
ThinkSystem SR665 V3 User Guide
60
167.
Chapter 6