Complete The Parts Replacement - Lenovo ThinkSystem SR665 V3 User Manual

Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Figure 117. Installing the top cover
Step 1. Ensure that the cover latch is in the open position. Lower the top cover onto the chassis until both
sides of the top cover engage with the guides on both sides of the chassis. Then, slide the top
cover to the front of the chassis.
Note: Before you slide the top cover forward, ensure that all the tabs on the top cover engage with
the chassis correctly.
Step 2. Rotate the cover latch until the top cover snaps into position. Ensure that the cover latch is
completely closed.
Step 3. Use a screwdriver to turn the cover lock to the locked position.

Complete the parts replacement

Go through the checklist to complete parts replacement
To complete the parts replacement, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your server.
2. Properly route and secure the cables in the server. Refer to the cable connecting and routing information
for each component.
3. Reinstall the air baffle if you have removed it. See
ThinkSystem SR665 V3 User Guide
164
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Install the air baffle" on page 59.