Ocp Module Replacement; Remove The Ocp Module - Lenovo ThinkSystem SR665 V3 User Manual

Figure 50. Installing the memory module
a. Gently open the retaining clip on each end of the memory module slot.
b. Align the memory module with the slot, and gently place the memory module on the slot
with both hands.
c. Firmly press both ends of the memory module straight down into the slot until the retaining
clips snap into the locked position.
After you finish
Complete the parts replacement. See

OCP module replacement

Follow instructions in this section to remove and install the OCP module.
• "Remove the OCP module" on page 93
• "Install the OCP module" on page 95

Remove the OCP module

Follow instructions in this section to remove the OCP module.
About this task
CAUTION:
Power off the server and disconnect all power cords from their power sources before performing this
procedure.
Attention:
• Read "Installation Guidelines" on page 39
work safely.
"Complete the parts replacement" on page
and "Safety inspection checklist" on page 40
164.
.
Chapter 5 Hardware replacement procedures
to ensure that you
93