Install A Memory Module - Lenovo ThinkSystem SR665 V3 User Manual

e. Locate the memory module slots and determine which memory module you want to remove
from the server.
Step 2. Remove the memory module from the slot.
Attention: To avoid breaking the retaining clips or damaging the memory module slots, handle the
clips gently.
Figure 49. Removing the memory module
a. Gently open the retaining clip on each end of the memory module slot.
b. Grasp the memory module at both ends and carefully lift it out of the slot.
After you finish
1. A memory module slot must be installed with a memory module or a memory module filler. See
memory module" on page
2. If you are instructed to return the component or optional device, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.

Install a memory module

Follow instructions in this section to install a memory module.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Memory modules are sensitive to static discharge and require special handling. Refer to the standard
guidelines at "Handling static-sensitive devices" on page
– Always wear an electrostatic-discharge strap when removing or installing memory modules.
Electrostatic-discharge gloves can also be used.
91.
and "Safety inspection checklist" on page 40
42:
.
Chapter 5 Hardware replacement procedures
"Install a
to ensure that you
91