Figure 115. Installing the system fan cage
Step 1.
Align the system fan cage with the mounting guides on both sides of chassis, and lower it into the
chassis.
Step 2.
Rotate the fan cage levers down until the fan cage clicks into place.
Note: If there are system fans installed in the system fan cage, ensure that the system fans are
correctly connected to the system fan connectors on the system board assembly.
After you finish
1. If you have removed the system fans, reinstall them. See
2. Complete the parts replacement. See
Top cover replacement
Follow instructions in this section to remove and install the top cover.
•
"Remove the top cover" on page 161
•
"Install the top cover" on page 163
Remove the top cover
Follow instructions in this section to remove the top cover.
S014
"Install a system fan" on page
"Complete the parts replacement" on page
Chapter 5
157.
164.
.
Hardware replacement procedures
161