Rack Front
Figure 17. Removing the server from the rack.
Release tab
1
a.
Press the release tabs to disengage the rails from the server.
b.
Carefully lift up the front end of the server slightly to detach the nailheads from the slots on
the rails.
c.
Lift up the server to remove it from the rails completely. Place the server on a flat and sturdy
surface.
After you finish
Carefully lay the server on a flat, static-protective surface.
Install the server to rack
Follow instructions in this section to install the server to the rack.
S036
18 - 32 kg (39 - 70 lb)
CAUTION:
Use safe practices when lifting.
R006
ThinkSystem SR665 V3 User Guide
52
32 - 55 kg (70 - 121 lb)