Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1.
If the key is held inside the security bezel, remove it out of the security bezel.
Figure 102. Removing the key
Step 2.
Carefully insert the tabs on the security bezel into the slots on the right rack latch. Then, press and
hold the release latch
Figure 103. Installing the security bezel
Step 3.
Use the key to lock the security bezel to the closed position.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
and rotate the security bezel inward until the other side clicks into place.
1
.
Chapter 5
Hardware replacement procedures
139