Lenovo ThinkSystem SR665 V3 User Manual page 60

• Before extending the rack to the installation position, read the
Do not put any load on the slide-rail mounted equipment in the installation position. Do not leave
the slide-rail mounted equipment in the installation position.
About this task
Attention:
• Read "Installation Guidelines" on page 39
work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See
"Power off the server" on page
CAUTION:
Make sure to have three people operate the server removal procedures to prevent injury.
Watch the procedure
A video of this procedure is available at YouTube:
DR4X1YAcp9wFKhwj_tLQ5Y
Procedure
Step 1. Loosen the two thumbscrews located on the front of the server to disengage it from the rack.
Rack front
Figure 14. Disengaging server from the rack
Rack latch
1
Thumbscrew
2
Step 2. Hold the mounting ears on the front of the server; then, slide the server all the way out until it stops.
ThinkSystem SR665 V3 User Guide
50
and "Safety inspection checklist" on page 40
48.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
.
"Installation Guidelines" on page
to ensure that you
39.