Technical Data; Iec 61850 Generic Communication I/O Functions Spggio; Identification; Functionality - Hitachi Relion 650 Series Technical Manual

Section 12
Monitoring
12.9.6

Technical data

Table 220: Disturbance report DRPRDRE technical data
Function
Current recording
Voltage recording
Pre-fault time
Post-fault time
Limit time
Maximum number of recordings
Time tagging resolution
Maximum number of analog inputs
Maximum number of binary inputs
Maximum number of phasors in the Trip Value
recorder per recording
Maximum number of indications in a disturbance
report
Maximum number of events in the Event recording
per recording
Maximum number of events in the Event list
Maximum total recording time (3.4 s recording time
and maximum number of channels, typical value)
Sampling rate
Recording bandwidth
Maximum time for saving new disturbance record
12.10 IEC 61850 generic communication I/O functions
SPGGIO
12.10.1

Identification

Function description
IEC 61850 generic communication I/O
functions
12.10.2

Functionality

IEC61850 generic communication I/O functions SPGGIO is used to send one single logical signal to
other systems or equipment in the substation.
216
Range or value
IEC 61850
identification
SPGGIO
© 2021 Hitachi Energy. All rights reserved.
-
-
(0.05–3.00) s
(0.1–10.0) s
(0.5–8.0) s
200, first in - first out
0.25 ms
30 + 10 (external + internally
derived)
96
30
96
150
1000, first in - first out
70 seconds (200 recordings) at
50 Hz, 50 seconds (200
recordings) at 60 Hz
4.0 kHz at 50 Hz
4.8 kHz at 60 Hz
(5-300) Hz
120 s
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
1MRK 511 557-UEN Rev. A
D0E7529T201305151403 v1
GUID-2B7AA22F-7D13-4448-AA8D-5CB86A615551 v3
Accuracy
± 1,0% of I at I ≤ I
r r
± 1,0% of I at I > Ir
± 1,0% of U at U ≤ U
r r
± 1,0% of U at U > U
r
-
-
-
-
See time synchronization
technical data
-
-
-
-
-
-
-
-
-
-
D0E7991T201305151403 v1
D0E8251T201305151403 v1
Technical Manual