Pulsetimer Function Block; Controllable Gate Function Block Gate - Hitachi Relion 650 Series Technical Manual

Section 11
Logic
11.1.1.4

PULSETIMER function block

Identification
Function description
PULSETIMER function block
Functionality
Triggered by a positive-going edge (logical 0 to 1 transition) on its input, PULSETIMER outputs a
pulse of settable duration. While the output is on, further transitions on the input signal will be
ignored.
Function block
INPUT
D0E13108T201305151403 V1 EN-US
Figure 52:
Signals
Table 85:
Name
INPUT
Table 86:
Name
OUT
Settings
Table 87: PULSETIMER Non group settings (basic)
Name
t
11.1.1.5

Controllable gate function block GATE

Identification
Function description
Controllable gate function block
Functionality
The GATE function block is used for controlling if a signal should pass from the input to the output or
not, depending on the setting.
118
PULSETIMER
OUT
IEC09000291-1-en.vsd
PULSETIMER function block
PULSETIMER Input signals
Type
BOOLEAN
PULSETIMER Output signals
Type
BOOLEAN
Values (Range) Unit
0.000 - 90000.000 s
© 2021 Hitachi Energy. All rights reserved.
IEC 61850 IEC 60617
identification identification
PULSETIMER
Default Description
0 Input signal
Description
Output signal
Step Default
0.001 0.010
IEC 61850 IEC 60617
identification identification
GATE
1MRK 511 557-UEN Rev. A
ANSI/IEEE C37.2
device number
- -
Description
Pulse time length
ANSI/IEEE C37.2
device number
- -
D0E6884T201305151403 v1
D0E6844T201305151403 v1
D0E6797T201305151403 v1
D0E7315T201305151403 v1
D0E7316T201305151403 v1
D0E7317T201305151403 v1
D0E6888T201305151403 v1
D0E6847T201305151403 v2
Technical Manual